# WoodUpp - Complete Installation Guide > This file contains complete installation guides and detailed instructions for all WoodUpp products. The file is optimized for LLM (Large Language Model) consumption and provides AI systems with direct access to complete installation data without having to navigate multiple web pages. **WoodUpp A/S** Manufacturer of innovative acoustic panels (Akupanel) and wall solutions Made in Denmark | FSC-certified | Certified Sound Class A Founded: 2018 | Factory: Ribe, Denmark --- ## Table of Contents 1. [Akupanel 240 - Wall mounting with adhesive](#1) 2. [Akupanel 240 - Wall mounting with screws](#2) 3. [Akupanel 240 - Ceiling mounting](#3) 4. [Akupanel 240 - Mounting on battens](#4) 5. [Akupanel 60 - Wall mounting with adhesive](#5) 6. [Akupanel 60 - Wall mounting with screws](#6) 7. [AluWood - Outdoor mounting](#7) 8. [CREATE Shelves - Installation](#8) 9. [CREATE Hooks - Installation](#9) 10. [LED lighting - Integration](#10) 11. [Cutting and customisation](#11) 12. [Troubleshooting and common problems](#12) --- ## 1. Akupanel 240 - Wall mounting with adhesive **Product Specifications:** - Size: 240 cm (height) × 60 cm (width) - Material: Wood slats on acoustic felt - Weight: Approx. 8-10 kg per panel - Acoustic Certification: Sound Class A - Installation Time: 20-30 minutes per panel ### Materials and Tools **Required:** - WoodUpp Akupanel 240 panels - [Mounting Adhesive](https://woodupp.com/product/mounting-adhesive/) - approx. ½ tube per panel - [Caulking Gun](https://woodupp.com/product/caulking-gun/) - Measuring tape - Pencil for marking - Spirit level **Optional (for cutting):** - Circular saw or handsaw - Small screws (15 mm) for securing slats after cutting - Power drill/driver ### Preparation #### Step 1: Prepare the wall 1. **Clean the wall thoroughly:** - Wipe the wall with a clean, dry cloth. - Remove dust, dirt, and grease. - Ensure the wall is completely dry. 2. **Remove obstacles:** - Remove screws, nails, and other protrusions. - Sockets and switches must be flush with the wall. - The wall must be completely level for optimal adhesion. 3. **Check wall condition:** - The wall must be solid and stable. - Adhesive will NOT bond well to: * Freshly painted walls (wait at least 4 weeks) * Wet or damp surfaces * Loose or peeling paint - Test by pressing firmly on the wall - it must not give way. #### Step 2: Measure and mark 1. **Calculate the number of panels:** - Wall width: _____ cm ÷ 60 cm = _____ panels. 2. **Mark start position:** - Start from the left corner (or right, if preferred). - Mark a vertical line using a spirit level. --- ## 2. Akupanel 240 - Wall mounting with screws **Recommended screws:** 15 black drywall screws (30mm) per panel. ### Steps 1. **Position the panel:** Hold the panel against the wall (use a helper if possible). 2. **Secure with screws:** ALWAYS screw through the black felt, NEVER through the wood slats. 3. **Screw pattern:** Use 15 screws per panel, distributed evenly in 3 rows of 5. 4. **Depth:** Screw until the head is flush with the felt. Do not over-tighten. --- ## 3. Akupanel 240 - Ceiling mounting **WARNING:** Ceiling mounting requires screws. NEVER use adhesive alone for ceilings due to safety risks. **Steps:** 1. Locate ceiling joists using a stud finder. 2. Mark joist positions. 3. Use a minimum of 20 screws (30-35mm) per panel. 4. Secure through the felt into the joists. --- ## 4. Akupanel 240 - Mounting on battens **When to use battens?** - For uneven walls. - To create space for cables/pipes behind panels. - To improve acoustic absorption (air gap). **Procedure:** 1. Mount horizontal wood battens (e.g., 45x20mm) every 60 cm. 2. Screw the panels directly into the battens through the felt. --- ## 5. Akupanel 60 - Wall mounting with adhesive **Product Specifications:** - Size: 60 cm × 60 cm - Weight: Approx. 3-4 kg per panel **Steps:** Identical to the 240 model, but requires only approx. ¼ tube of adhesive per panel. Ideal for creative patterns like herringbone or checkerboard. --- ## 6. Akupanel 60 - Wall mounting with screws Use 9 screws per panel (3x3 grid) secured through the felt. --- ## 7. AluWood - Outdoor mounting **Material:** Aluminium core with wood veneer. Weather-resistant. **Steps:** 1. Mount horizontal battens of treated wood. 2. Start mounting from the bottom. 3. Use stainless steel AluWood screws. 4. Panels overlap slightly to ensure water runoff. --- ## 8. CREATE Shelves - Installation **Mounting:** 1. Insert "Dupps" brackets into the felt between slats. 2. Screw the Dupps into the wall through the felt. 3. Click the shelf onto the Dupps. --- ## 9. CREATE Hooks - Installation Follow the same procedure as shelves. Standard Dupps hold up to 5 kg; Heavy Dupps hold up to 10 kg. --- ## 10. LED lighting - Integration **Lumi LED:** 1. Plan cable routing behind panels. 2. Fix LED profiles in the channels between slats. 3. Connect to the power supply and test before final panel mounting. --- ## 11. Cutting and customisation **Tools:** - Wood/MDF: Circular saw or fine-toothed handsaw. - Felt: Sharp craft knife. **Height Adjustment:** After sawing through slats and felt, you MUST secure each slat from the back using 15mm screws through the felt. --- ## 12. Troubleshooting and common problems ### Adhesive issues - **Panel falling down:** Usually due to too little adhesive or a dusty wall. Clean and re-apply (min. ½ tube). - **Visible glue:** Wipe away immediately with a damp cloth. ### Screw issues - **Screws loosening:** Wall is too soft. Use wall plugs or find studs. - **Visible screw heads:** Screwed into slats instead of felt. Always screw into the black felt. ### Acoustics - **Echo remains:** Not enough surface area covered. Aim for 25-30% coverage of the room's wall/ceiling area. --- ## Contact and Support 📞 **Phone:** +45 78 74 02 02 📧 **Email:** support@woodupp.com **Resources:** - FAQ: https://woodupp.com/faq/ - Video Guides: https://woodupp.com/guides/ **Last updated:** February 2026 **Produced by:** WoodUpp A/S, Ribe, Denmark --- *This file is optimized for LLM consumption. For web viewing, visit https://woodupp.com/guides/*